Specifications

Doors
TM
Users Guide Keri Systems, Inc.
2-18 Section 2: Setup System 01914-002 Rev. 5.5
3. To enable elevator, gate, or time and attendance terminal control, click in the box beside Elevator
ON, Gate ON, or Time and Attendance Terminal ON. A check mark appears in the check box and
one of the following windows appear, depending on which box was checked (see Figure 2-16,
Figure 2-17, and Figure 2-18).
Figure 2-16: Elevator Option Changed Warning - ON
Figure 2-17: Gate Option Changed Warning - ON
Figure 2-18: Time and Attendance Terminal Option Changed Warning - ON
4. Click on the button. A “Saved Configuration” window flashes on the screen.
5. You must complete this activation and saving process for each door type option you use (once for
elevator, once for gate, and once for time and attendance terminal).
6. Once the Door Type field is filled out as needed, click on the button to save these changes.
If the Door Type is not saved before clicking any other button or exiting the System Options
window, the data entered is lost and must be re-entered.