Specifications

Doors
TM
Users Guide Keri Systems, Inc.
2-14 Section 2: Setup System 01914-002 Rev. 5.5
2. If APB is not required in your application, verify there is not a check mark in the APB ON box.
This is the default value (see Figure 2-8 on page 13 of this section).
3. To enable APB, click in the APB ON check box. A check mark appears in the APB ON box and the
following window appears (see Figure 2-9).
Figure 2-9: Enabling Local Anti Passback Confirmation
4. Click on the button. A “Saved Configuration” window flashes on the screen and then
the three types of APB amnesty appear as radio buttons displayed in the Automatic APB Amnesty
field (see Figure 2-10).
5. Once an APB amnesty type has been set (see below for information on each option), click on the
button to save these changes. If the APB amnesty type is not saved before clicking any
other button or exiting the System Options window, the data entered is lost and must be re-entered.
1.2.5.1 Automatic APB Amnesty – None
When the None radio button is ON (see Figure 2-10), it means that although APB is in use, amnesty is
never automatically granted. If amnesty is ever required for a user, it can be manually granted by an
operator (this process is described in “Anti Passback Amnesty” on page 26 in section 6).
Figure 2-10: No Automatic APB Amnesty