Specifications

Doors

Users Guide Keri Systems, Inc.

2-10 Section 2: Setup System 01914-002 Rev. 5.5

1.2.4 Set Network Master Parameters

The following network master parameters, when set, apply to all controllers on the access control

network:

• daylight savings adjustment

• global unlock enable

• global lock enable

• global secure time

1. From the System Options tab, click on the button. The System Options

window will reveal the Network Master Parameters field where the three parameters listed above

may be set (see Figure 2-7).

Figure 2-7: Network Master Parameters Field

1.2.4.1 Daylight Savings Adjustment

The Daylight Savings Adjustment feature allows the controllers to automatically adjust the time on the

controllers when daylight savings time comes and goes.

1. To enable the daylight savings adjustment click in the check box beside the Daylight Savings

Adjust field. When there is a check in the box, the feature is enabled (this is the default value).

2. To disable this field, click in the check box again and remove the check mark.

NOTE: Daylight Savings Time for all participating U.S. states, the District of Columbia, and U.S.

possessions begins at 2 A.M. on the first Sunday in April and ends at 2 A.M. on the last Sunday in

October. For states and countries not participating in daylight savings time, you must disable the

daylight savings time adjustment feature.