Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-002 Rev. 5.5 Section 2: Setup System 2-3
1.0 Set the System Parameters
It is necessary to set the system parameters in order to let Doors know what features will be used for this
network. All three of the following tasks must be performed to properly set the system parameters.
• set the network configuration parameters
• set the system option parameters
• save the system parameters
All three of these tasks are performed from the Setup System window. To access the Setup System
window:
1. Click on the Setup ⇒ System pull-down menu or click the button on the tool bar.
2. The first time the setup menu is entered (and every time until the system configuration parameters
have been saved), the Setting Up The System window appears as a reminder that the system
autoconfiguration needs to be performed (see Figure 2-1).
Figure 2-1: Setting Up The System Window
3. Click on the button. The Setup System window appears (see Figure 2-2).
Figure 2-2: Setup System Window