Specifications

Doors
TM
Users Guide Keri Systems, Inc.
15-10 Section 15: Video 01914-015 Rev. 5.9
Video Server Name
The Video Server Name that was entered during the Setup Video Server process appears here.
Camera Name
From the pull-down list, select the camera to be assigned to the input point in the second column.
NOTE: More than one camera may be assigned to each input point and more than one input point may
be assigned to each camera. It is all dependent on where the cameras are pointed.
2. Click on the button to save each row. Repeat the process for as many cameras/input point
combinations there are. If the information is not saved before clicking any other button or exiting
the Setup Video window, the data entered is lost and must be re-entered.
• To make changes to a row that has already been saved, click on the row that needs changed and
then click on the button. Make the necessary changes and click on the button.
• To remove a row before it has been saved, click on the row to be removed and then click on the
button.
• To remove a row after it has been saved, click on the row to be removed and then click on the
button.
3. The finished window may appear similar to Figure 15-12.
Figure 15-12: Auxiliary Input Point and Cameras Assigned
NOTE: If a camera name has been changed, DO NOT delete the Auxiliary Input Point Camera
Tab setup. Add a new row for the new camera name. If the old camera setup is deleted, Doors will not
be able to find any video-related events that took place prior to the camera name change.