Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-015 Rev. 5.9 Section 15: Video 15-9
3. The finished window may appear similar to Figure 15-10.
Figure 15-10: Door Cameras Tab with Doors and Cameras Assigned
NOTE: If a camera name has been changed, DO NOT delete the Door Camera Tab setup. Add a new
row for the new camera name. If the old camera setup is deleted, Doors will not be able to find any
video-related events that took place prior to the camera name change.
2.3 Auxiliary Input Point Cameras
For those using auxiliary inputs in Doors, cameras may be assigned to begin filming when specific
inputs occur. To assign cameras to specific auxiliary inputs start from the Setup ⇒ Video window. Click
on the Auxiliary Input Point Cameras Tab and the window appears (see Figure 15-11).
NOTE: Before beginning this section, assign camera names on the video server first. Once a camera
has been assigned a name and assigned to specific inputs, changing the camera name will require a new
camera/input mapping.
Figure 15-11: Auxiliary Input Point Cameras Window
1. Click on the button. A new blank row appears.
Controller Address
From the pull-down list, select the controller to be assigned a camera. Only controllers with a satellite
board (SB-293 or SB-593) will be available for use.
Auxiliary Input Point Name
From the pull-down list, select the input point to be assigned a camera.
Video Server TCP/IP Address
The TCP/IP address of the video server is automatically entered.