Specifications

Doors
TM
Users Guide Keri Systems, Inc.
15-6 Section 15: Video 01914-015 Rev. 5.9
Clock Sync Time
*
Displays the time of the last sync of the access control network clock and the video server PC clock.
Access Control Site
Lists all access control sites available for use with the video feature. Use the pull-down menu to select
the access control site to be associated with the video server.
Server TCP/IP Address
Enter the TCP/IP address of the video server.
Server Ethernet Port
Displays TCP port on which the video server listens for Doors connection requests. The default is set
for 7128 and should not be edited.
Server User ID
Enter a User ID that has been set up on the video server. For details on how to set up User IDs on the
video server, refer to the Visions Server Setup and Users Guide
(P/N 01975-001). The User ID is case
sensitive and may be used by one program/operator at a time. It is recommended that a Doors-only User
ID is set up.
Server Password
Enter the password that has been associated with the User ID entered. It must be the same as it was set
up on the Video Server and is case sensitive.
Confirm Password
Enter the same password as in the previous field.
1. Click on the button to save these changes. If the Video Server information is not saved
before clicking any other button or exiting the Setup Video window, the data entered is lost and
must be re-entered. The clock synchronization automatially starts. Follow the steps beginning in
“Synchronize Clocks” on page 7.
2. Once the clocks have been synchonized, the Video Server tab should then be similar to Figure 15-6.
Figure 15-6: Video Server Tab