Specifications

Doors
TM
Users Guide Keri Systems, Inc.
14-16 Section 14: Dual Verification 01914-014 Rev. 5.5
4. The process of filling out the Enroll Cards fields is the same either for enrolling by block number
range or by presenting to a reader, except in the “Number” field. Select the radio button for Enroll
Secondary.
5. In the “Secondary Format” field, select the format of the type of Secondary ID.
6. Once the block enrollment fields have been filled in or the credentials have been presented to a
reader or keypad, click on the button. The Add Secondary Numbers To All
Users window will appear (see Figure 14-25).
Figure 14-25: Add Secondary Numbers to All Users Window
7. Click on the button. The Setup Users spreadsheet window will appear (see
Figure 14-26). Any users already assigned a Primary and Secondary ID will not be visible.
Figure 14-26: Setup Users - Select Users For Secondary ID Addition
8. Click on the users to be assigned a Secondary ID. There are three ways to select the users to which
a Secondary ID should be assigned. Use the method you find easiest (see Figure 14-27 on page 17
of this section).
• Click and hold on the row of the first user to be assigned a Secondary ID and drag the mouse
down to the row of the last user.
• Click on the row of the first user to be assigned a Secondary ID, hold the Shift key down, and
click on the row of the last user.
• Hold the Ctrl key down and one-at-a-time click on the rows of each user to be assigned a
Secondary ID. This method is best used when the users are not in sequential order.