Specifications

Doors
TM
Users Guide Keri Systems, Inc.
14-12 Section 14: Dual Verification 01914-014 Rev. 5.5
NOTE: If the Doors program is unable to enroll a card (because that card is faulty or has already been
enrolled), the reader will provide one long beep and an error message window is displayed providing a
brief description of the problem with the card being enrolled. Click the button to acknowledge
the error message; then correct the problem and continue card enrollment. If there is no
acknowledgement by the reader, after a card has been presented, the card may be of a format that is
incompatible with the reader.
10. The Secondary ID keypad’s LED blinks slowly to indicate it is ready for enrolling the Secondary
ID. On an Essex Keypad, press the keys for the secondary ID (maximum of four digits) followed by
the # key.
11. Return to the primary reader and present the next card. Once it is accepted, the secondary reader
will be ready for enrollment of the Secondary ID.
12. Continue presenting cards and entering PINs alternating between the reader and keypad until all
have been enrolled. When completed, the card enrollment window should look similar to Figure
14-19.
Figure 14-19: Enroll Cards - Presentation to a Reader Completed
13. Click on the button.
14. Continue on to “Verify Enrollment” on page 13 of this section.