Specifications

Doors
TM
Users Guide Keri Systems, Inc.
14-10 Section 14: Dual Verification 01914-014 Rev. 5.5
4.1.2 Enrollment of Primary and Secondary IDs by Presenting to a Reader
NOTE: Enrollment by presenting to a reader for Dual Verification may be performed if the master
controller is a Wiegand only. If the master controller is not a Wiegand, enrollment must be performed
by block enrollment.
1. To enroll Primary and Secondary IDs by presenting to a reader, click on the Setup ⇒ Users pull-
down menu or click on the tool bar button. These two icons are added to the tool
bar and the Setup Users spreadsheet window appears (see Figure 14-13). If the setup users
spreadsheet window is not visible, click on the tool bar button.
Figure 14-13: Setup Users Spreadsheet Window
NOTE: If the Setup Users window does not display the Secondary ID column, click on the button,
select the Preferences tab, and verify the Show Secondary IDs check box has a check in it. If there is no
check, click on the check box and a check will appear allowing the column to be displayed.
2. Click on the button. If the Doors program is not connected to the access control network,
the program will automatically connect. The Enroll Cards window appears. Click on the
button. The Enroll Cards window is ready for enrollment of Wiegand cards by
presenting to a reader (see Figure 14-14).
Figure 14-14: Enroll Cards - Presentation to a Reader