Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-014 Rev. 5.5 Section 14: Dual Verification 14-7
NOTE: If the Setup Users window does not display the Secondary ID column, click on the button,
select the Preferences tab, and verify the Show Secondary IDs check box has a check in it. If there is no
check, click on the check box and a check will appear allowing the column to be displayed.
2. Click on the button. If the Doors program is not connected to the access control network,
the program will automatically connect. The Enroll Cards window appears. Click on the
button. The Enroll Cards window is ready for block enrollment of Wiegand
cards (see Figure 14-5).
Figure 14-5: Enroll Cards - Block Enrollment
3. In the “Numbers” field, click on the Enroll Both radio button (see Figure 14-6).
Figure 14-6: Enroll Cards - Numbers Field
4. In the “Primary Format” field, click on the radio button that corresponds to the type of format used
for Primary ID (see Figure 14-7).
Figure 14-7: Enroll Cards - Primary Format Field
5. Once the Enroll Both radio button has been selected in the “Numbers” field, the “Secondary
Format” and “Wiegand Secondary Number Range” fields become active. In the “Secondary
Format” field, click on the radio button that corresponds to the type of format used for Secondary
ID (see Figure 14-8 on page 8 of this section).