Specifications

Keri Systems, Inc. Doors

Users Guide

01914-001 Rev. 5.5 Section 1: Installation of Doors 1-31

15.0 Disconnect from the Access Control Network

In order to perform the following functions, the host computer must be actively connected to the access

control network. In the case of modem connections between a host computer and a remote site, Doors

will automatically dial-up the remote site. When these actions are complete, Doors does not

automatically disconnect

• Autoconfig

• User Enrollment (when using the Presenting to a Reader method of enrollment)

•Set Time

• Update Net

• User Initiated Door Commands

• Monitor or Event Collection Modes

NOTE: If the connection between host computer and access control network is made via modem over

a distance that requires a toll call, the connection must be manually disconnected. Otherwise, the

resulting phone bill can be needlessly high.

1. To disconnect from the access control network, click on the Operate ⇒ Net Disconnect pull-down

menu. The access control network is immediately disconnected from the host computer.

16.0 Exiting Doors

Perform the following step to exit the Doors program and return to the operating system.

NOTE: Exiting the Doors program does not halt operation of the access control network. The network

operates based on all the information uploaded to the network by the Doors program. The Doors

program is only needed for making changes to the network, receiving events from the network, and for

real-time monitoring of network activity.

1. Click on the File ⇒ Exit pull-down menu. If the program is connected to the access control

network it will disconnect from the network. If any database changes have been made that have not

been saved, the program will prompt the operator to either save or not save these changes. The

Doors program will then shut-down.

1. When using the internal modem on the EntraGuard Gold Telephone Entry Controller, Doors is

automatically disconnected.