Specifications

Doors
TM
Users Guide Keri Systems, Inc.
13-4 Section 13: Temp Users 01914-013 Rev. 5.3
Figure 13-2: Temp Users Option Changed Window – ON
4. Click on the button and the conversion to Temp Users mode automatically occurs.
5. Now update the access control network with the new information. Click on the button on
the tool bar (for details on the update process refer to “Update the Network” on page 35 in
section 5).
2.0 Setup Users Changes
When the temp users feature is enabled changes are made to the Setup Users Spreadsheet and Setup
Users Dialog Box. These changes allow for activation and expiration dates to be pre-set.
2.1 User Data – Dialog Box Changes
When the Temp Users feature is enabled in Doors, 4 new fields are added to the User Data tab to allow
for data entry of pre-set activation and expiration dates. Leaving any of these fields blank will cause that
user to be considered a standard user and all entry will be based on whether the card has been enabled or
disabled. For more detail on the Dialog Box method of entering user data, see “User Data – Dialog Box
Method” on page 13 in section 4.
1. To enter user data through the dialog box method, click on the Setup ⇒ Users pull-down menu or
click on the tool bar button. These two icons are added to the tool bar and the
Setup Users spreadsheet window appears.
2. Click on the tool bar button to ensure the setup users dialog box window is active.
3. Click on the User Data tab. The User Data window appears (see Figure 13-3 on page 5 of this
section).