Specifications

Doors
TM
Users Guide Keri Systems, Inc.
12-6 Section 12: Alarm Control 01914-012 Rev. 5.5
3.0 Alarm Control Message Text Strings
When the Alarm Control feature is enabled in Doors, an additional tab appears in the Setup Monitors
window. There are 87 possible alarm control events that can be tracked. Each event is identified by a
message text string that is a brief description of the event generated by the alarm panel when an event
occurs. These strings can be edited by the operator to be more descriptive, making report viewing easier.
There is a 40 character maximum for these text strings. For detailed information on ways to use the
message text strings, refer to the Doors
Users Guide (P/N 01914-100).
Figure 12-6: Alarm Control Message Text Strings
3.1 Alarm Control Message Text String Definitions
NOTE: 81 of the message text strings are generated by the alarm panel. For further information on
these messages and what events generate them, refer to the NetworX documentation.
Alarm System ARM Request
Reported whenever a card is presented to a reader that has been set as an alarm arming reader.
Alarm System DISARM Request
Reported whenever a card is presented to a reader that has been set as an alarm disarming reader.
Alarm System Request Failed
Reported whenever an arm/disarm request has failed.
Master Communication Restored
Reported whenever communication between a master and slave controller is restored following a loss of
communication.
Master Unable to Verify Slave Alarm Stat
Reported whenever access is denied on a slave or master because of a communication failure with the
alarm panel.
PXL Slave Lost Communication with Master
Reported whenever communication between a master and slave controller occurs.