Specifications

Keri Systems, Inc. Doors

Users Guide

01914-010 Rev. 5.4 Section 10: EntraGuard 10-41

8.0 Search For EntraGuard/Video-Related Events Using

VideoTeleTrack

NOTE: Before searching for video-related events, make sure all events have been collected from the

controllers.

1. To locate an EntraGuard event with any associated video clips using VideoTeleTrack, click on the

button, or the Reports ⇒ Searchable Events pull-down menu option (click on the

VideoTeleTrack tab). The Event Reports window appears (see Figure 10-11).

NOTE: The information for locating EntraGuard/Video-related clips is the same no matter which option

is used to open the report window.

Figure 11: VideoTeleTrack Window

2. Verify there is a check mark in the “Find Related Video Plus or Minus 5 Seconds” check box. The

default is set for 5 seconds before and after an event takes place, however this may be changed for

up to 999 seconds before and after an event.

NOTE: If the check box is greyed out then the video feature has not been enabled (see “Enable Video in

Doors” on page 3 in section 15).

3. Select the User and Dates to be searched, then click on the button.

4. Doors will connect to the video server and search for events that match the search criteria.

5. If there was no data that meets the search criteria, an empty report warning window appears (see

Figure 12).

Figure 12: No Records Matched the Request Window