Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-010 Rev. 5.4 Section 10: EntraGuard 10-29
5.1.4 Add Cards to Previously Enrolled User IDs
In some cases cards may need to be enrolled for users who already have User IDs assigned to them (for
instance when an already existing EntraGuard system adds a PXL controller).
NOTE: Make sure wither the “Use Both Cards and EntraGuard IDs” option or the “Only Use Cards”
option is selected (see “Select Enrollment Options” on page 4 of this section). If the “Only Use
EntraGuard IDs” option is selected, enrollment of cards will not be possible.
1. To add cards to users with previously enrolled User IDs, click on the Setup ⇒ Users pull-down
menu or click on the tool bar button. These two icons are added to the tool bar and
the Setup Users spreadsheet window appears (see Figure 10-41). If the setup users spreadsheet
window is not visible, click on the tool bar button.
2. The existing database should be visible with all previously enrolled users and their User ID
information (see Figure 10-41).
Figure 10-41: Setup Users Spreadsheet Window with Existing User IDs
NOTE: If the Setup Users window does not display the Internal Num and Card Num columns, click on
the button, select the Preferences tab, and verify the Show Internal Card Numbers and Show Card
Numbers check boxes have checks in them. If there is no check, click on each check box and a check will
appear allowing the columns to be displayed.
3. Click on the button. If the Doors program is not connected to the access control network,
the program will automatically connect. The Select Enrollment Method window appears (see
Figure 10-42 on page 30 of this section).