Specifications

Keri Systems, Inc. Doors

Users Guide

01914-010 Rev. 5.4 Section 10: EntraGuard 10-21

12. The Enroll EntraGuard User IDs window appears (see Figure 10-27 on page 21 of this section).

Figure 10-27: Enroll EntraGuard User IDs with Cards

13. Make a selection from the four buttons on the left according to your enrollment needs and the

information given below.

Enroll a Block of Random User IDs

1. To enroll a block of randomly generated User IDs, click on the button. Since

these EntraGuard User IDs are being enrolled in connection with access cards, the number of

randomly generated User IDs is pre-selected based on the number of cards enrolled in the previous

window.

2. Click on the button. Skip to “Verify Enrollment of Cards and User IDs” on

page 22 of this section.

Enroll One Random User ID

NOTE: This button should not be used unless only one card has been enrolled. Selecting this button will

cause only one user to be enrolled regardless of the information entered in the Enroll Cards window.