Specifications

Keri Systems, Inc. Doors

Users Guide

01914-010 Rev. 5.4 Section 10: EntraGuard 10-19

4. If the cards to be enrolled are Keri Proximity cards, click on the button.

5. If the cards to be enrolled are 26-bit Wiegand cards, click on the button.

NOTE: Once the EntraGuard feature is enabled, enrollment of cards by presentation to a reader is no

longer available.

6. Locate the Keri/Wiegand Card Number Range field. Click in the Starting From field. Enter the

card number for the first

card in the range of cards to be enrolled (the lowest number). The card

number is the second set of digits printed on the body of the card (in Figure 10-24, it is the digits

corresponding to 187491). The card number will be more than 4 digits long. For example, the entire

number of the first card is K1757 187491; the card number is 187491, 6 digits long.

Figure 10-24: Proximity Card/Key Tag Number

7. Locate the Keri/Wiegand Card Number Range field. Click in the To field. Enter the card number

for the last

card in the range of cards to be enrolled (the highest number).

8. Locate the Facility Code field. Click in the FACILITY CODE field and enter the facility code for

the cards. The default facility code value is 0 (zero).

NOTE: For Keri Proximity cards, facility codes may range from 0 to 31. For 26-bit Wiegand cards,

facility codes may range from 0 to 255. The facility code is programmed into each card. To enroll cards,

you must know the facility code programmed into the card. If you do not know the facility code for the

cards you are enrolling, please contact your card supplier for the facility code number before

continuing the card enrollment process.

NOTE: If you are block enrolling non-Keri Wiegand cards, be sure you know the actual internal card

numbers programmed into the cards and verify the internal numbers are in consecutive order. Using

incorrect numbers and non-consecutive cards invalidate the block enrollment process.

9. The default for User Assigned Card Numbers is to copy the card number from the Keri/Wiegand

Card Number Range field. If there is a need for user assigned card numbers that are different from

the card number printed on the body of the card, locate the User Assigned Card Numbers field.

Click in the Starting field. Enter the user assigned number for the first card in the set. Numbers for

the remaining cards will be assigned in ascending, sequential order from the first number.