Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-010 Rev. 5.4 Section 10: EntraGuard 10-15
Enroll a Block of User IDs
1. To enroll a block of operator assigned User IDs, click on the button. The Enroll
EntraGuard User IDs window will reveal the following field (see Figure 10-16).
Figure 10-16: Enroll a Block of User IDs Field
2. Click in the “Starting From” field, and enter the first User ID to be enrolled (the lowest number).
3. Click in the “To” field, and enter the last user ID to be enrolled (the highest number).
NOTE: The number of digits will be limited to the number selected when enabling the EntraGuard
feature (see “Select Directory Code and User ID Digits” on page 4 of this section).
4. Click on the button. Skip to “Verify Enrollment of User IDs” on page 16 of
this section.
Enroll One User ID
1. To enroll one operator assigned User ID, click on the button. The Enroll
EntraGuard User IDs window will reveal the following field (see Figure 10-17.
Figure 10-17: Enroll One User ID Field
2. Click in the “Enter ID” field and enter in the User ID to be enrolled for one user.
NOTE: The number of digits will be limited to the number selected when enabling the EntraGuard
feature (see “Select Directory Code and User ID Digits” on page 4 of this section.
3. Click on the button. Skip to “Verify Enrollment of User IDs” on page 16 of
this section.