Specifications

Keri Systems, Inc. Doors

Users Guide

01914-010 Rev. 5.4 Section 10: EntraGuard 10-13

5.1.1 Enroll User IDs Only

If the only controllers on your system are EntraGuard Telephone Entry controllers, each user will need

to be assigned a User ID. The following instructions are based on the assumption that the “Only Use

EntraGuard IDs” option was selected (see “Select Enrollment Options” on page 4 of this section).

1. To enroll User IDs, click on the Setup ⇒ Users pull-down menu or click on the tool bar

button. These two icons are added to the tool bar and the Setup Users spreadsheet

window appears (see Figure 10-12 on page 13 of this section). If the setup users spreadsheet

window is not visible, click on the tool bar button.

Figure 10-12: Setup Users Spreadsheet Window - EntraGuard User IDs Only

NOTE: If the Setup Users window does not display the EntraGuard User IDs column, click on the

button, select the Preferences tab, and verify the Show EntraGuard IDs check box has a check in it. If

there is no check, click on the check box and a check will appear allowing the column to be displayed.

Make sure all the other check boxes are empty as none of them apply to EntraGuard only systems.

2. Click on the button. If the Doors program is not connected to the access control network,

the program will automatically connect. The Enroll EntraGuard User IDs window appears (see

Figure 10-13).

Figure 10-13: Enroll EntraGuard User IDs