Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-010 Rev. 5.4 Section 10: EntraGuard 10-7
3.1.1 EntraGuard Banner Messages
The EntraGuard LCD (located on the front of the EntraGuard controller) is capable of rotating 3 banner
messages. The space available is determined by the EntraGuard controller in use.
3.1.1.1 Edit Gold/Titanium Banner Message
The EntraGuard LCD (located on the front of the EntraGuard Gold/Titanium controller) is capable of
rotating 3 banner messages made up of 80 characters each. Spacing is limited so carefully plan what
each banner message will say.
Figure 10-5: Setup System Controllers Tab – Part 2 (EntraGuard Gold/Titanium)
Edit Msg#
Click on the button to bring up the edit message window (see “Edit Gold/Titanium Banner
Message” below).
EG Banner Message#
This field shows what is entered as the message banner.
EG Msg Timer#
This field determines the amount of time each message should be shown on the EntraGuard LCD before
going on to the next message. For best readability it is recommended this be set for 10 seconds.
1. To edit the banner message, click on the Setup ⇒ System pull-down menu or click on the tool
bar button. Then click on the Controllers tab. The Controllers window appears (see Figure 10-5).
2. Scan down the controller addresses column and locate the EntraGuard controller.
3. Scroll across that controller’s row in the spreadsheet and locate the Edit Msg1 column (see Figure
10-5).
4. Click on the button. The Edit Banner Message window will appear (see Figure 10-6).
Figure 10-6: Edit Banner Message1 Window