Specifications

Doors
TM
Users Guide Keri Systems, Inc.
1-24 Section 1: Installation of Doors 01914-001 Rev. 5.5
12.4 Exiting a Doors Window
Whenever changes are made to information in a window, these changes must be saved by clicking on
the button before exiting the window, or the changes will be lost and must be re-entered. Once
saved, the access control network must be updated for this new information to be applied by the access
control network. Click on the button on the tool bar to update the network (for details on the
update process refer to “Update the Network” on page 35 in section 5).
1. To exit any window in the program at any time, click on the box in the upper-right corner of a
window.
NOTE: If you click on the box in the upper-right corner of the main Doors window you will close the
Doors program immediately, provided all changes have been saved and you have been granted
operator authority to close the program.
2. If changes have been made to the database that have not been saved, a “Data Has Changed”
warning will appear (see Figure 1-16).
Figure 1-16: Data Has Changed Warning
3. If you still want to close the window without saving the changes, click on the button.
4. If you want to save the changes before closing, click on the button. Then click on the
button.