Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-009 Rev. 5.2 Section 9: Photo Badge Management 9-27
Figure 9-32Signature Image Enhancement
11. A variety of adjustments can be made to improve the quality of the signature. At all times, a copy of
the original signature is kept in the Original Image pane of the Image Enhancement window. All
adjustments are made to the photograph in the Preview Image pane of the Image Enhancement
window. The following adjustments can be made.
- Exposure – to brighten or darken the image.
- Contrast – to emphasize or de-emphasize the difference between light and dark portions of the
image.
- Red/Cyan Color Balance – to adjust the amount of Red/Cyan tint in the image.
- Green/Magenta Color Balance – to adjust the amount of Green/Magenta tint in the image.
- Blue/Yellow Color Balance – to adjust the amount of Blue/Yellow tint in the image.
Make these adjustments as necessary to improve the quality of the signature image. If you become
dissatisfied with all the adjustments made, you can always return to the original image by clicking
on the button.
To view the entire signature image, click on the Whole Image radio button. The entire image is
resized and displayed in both the Original and Preview image panes. To view the signature image
in the perspective in which it will be printed, click on the One to One radio button. The image is
displayed in both the Original and Preview image panes in its original size, which may be either
smaller or larger than the pane size.
12. To exit the Image Enhancement window without making any changes, click on the
button. You can either start the Acquire Signature process all over again (return to Step 1 on
page 24) or exit the Badging Wizard entirely by clicking the button again.
13. If you are satisfied with your adjustments, click on the button. The Acquire and Edit
Images window appears with the user photo displayed (see Figure 9-33 on page 28 of this section).