Specifications

Doors
TM
Users Guide Keri Systems, Inc.
9-26 Section 9: Photo Badge Management 01914-009 Rev. 5.2
6. Once all these values are set, click on the button followed by the button. The
Select Signature Source window re-appears (see Figure 9-27 on page 24 of this section).
7. Click on the button and the Capture Signature window appears (see Figure 9-30).
Figure 9-30Capture Signature Window
8. Have the user take the stylus in hand and enter a signature, just like signing a piece of paper. As the
signature is written, it appears in the Capture Signature window (see Figure 9-31).
Figure 9-31Capture Signature Window with Signature
9. If the quality of the signature is not acceptable, click on the button. The Capture
Signature window is cleared and ready to accept another signature. Repeat Step 8.
10. When an acceptable signature is entered, click on the button. The Image Enhancement
window appears (see Figure 9-32 on page 27 of this section).