Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-009 Rev. 5.2 Section 9: Photo Badge Management 9-25
Figure 9-28: Capture Profile Properties
4. The Perform Automatic Enhancements check box should be blank, allowing you the flexibility to
edit a signature image if necessary. Click on the Device Options tab. The Device Options tab
appears (see Figure 9-29).
Figure 9-29: Device Options Tab
5. To ensure the proper aspect ratio for digital signatures, the tablet options must be set as displayed in
Figure 9-29.
- Image Size has two fields: width x height. Click the width field and enter 500. The height field
will automatically be set with the matching aspect ratio value.
- Click the “Resolution” field and set the resolution to 15.
- Click the “Pen Width” field and set the pen width to 3. This value may need to be adjusted
depending upon how hard the users press down on the digital pad when entering their
signatures.
- Verify there is a check mark in the Trim White Space Around Image check box, click in the
“Leave Margin” field and set the value to 1.