Specifications

Keri Systems, Inc. Doors

Users Guide

01914-009 Rev. 5.2 Section 9: Photo Badge Management 9-23

NOTE: The greater the number of colors, the better the image, but the larger the file size will be. The

settings in the “Compression” field are automatically set at standard values for the file type selected.

Unless you are familiar with graphic file compression, it is recommended that you leave the

Compression settings at their standard values.

13. By default, the exported user photo file is saved in the same folder with the original user photo. If

the photo file should be saved in a different folder, click the at the right side of the “Save in”

field. Navigate through the folders in the host computer’s hard disk drive until you locate the

desired folder. Click on the button. The user photo file is exported and the Acquire and

Edit Images window reappears (see Figure 9-24 on page 22 of this section).

14. Once the user photo has been acquired, you have three options.

- To acquire a secondary image, skip to “

Acquire and Edit Images” below.

- To acquire a digital signature, skip to “Acquire and Edit Signatures” on page 24 of this section.

- If you are ready to print a card, click the button and skip to “

Preview and

Print a Badge” on page 29 of this section.

5.3 Acquire and Edit Images

An image can be acquired to provide an extra level of security. Any type of graphic image can be used;

such as a fingerprint or an alternate photograph of the user. The process for acquiring and editing an

image is exactly the same as that for acquiring and editing a user photo. Follow the instructions in

“

Acquire and Edit User Photo” on page 20 of this section, replacing the Photo buttons with the

corresponding Image buttons.