Specifications

Doors
TM
Users Guide Keri Systems, Inc.
9-14 Section 9: Photo Badge Management 01914-009 Rev. 5.2
3.5 Saving the Template
Once the template is complete, it must be placed in the C:\Kerisys\Doors32vX.X\db\badge folder
1
to
ensure the Doors program can locate and use the template to print a badge.
1. Click the File ⇒ Save pull-down menu. The Save As window appears (see Figure 9-12).
Figure 9-12: The Save As Window
2. Click the at the right side of the “Save in” field and the current folder structure is displayed (see
Figure 9-13).
Figure 9-13: The Template Folder Structure
3. Verify the folder path listed in the folder structure
2
is:
C:\Kerisys\Doors32vX.X\db\badge\
1
.
Doors is now ready for badging operations.
NOTE: Once you have saved a completed template, you may want to save a second copy under a new
name for card proofing purposes. Select your default Windows printer for this proofing copy. This will
enable you to print examples of the badges from your Doors software to your local printer before you
print a badge. However, you must use the template that was originally saved with the badge printer
selected when you are ready to print badges.
1. X.X is the revision number of the installed Doors software.
2. This is automatically set to the default Doors installation folder. If you have installed the Doors
program in a different folder, navigate through the folder structure to locate the Doors folder in
which you have installed the program.