Specifications

Keri Systems, Inc. Doors

Users Guide

01914-009 Rev. 5.2 Section 9: Photo Badge Management 9-13

Figure 9-11: Page Setup for a Badge

6. Click the arrow at the right side of the “Card Size” field and a list of available standard card

formats appears.

7. Scroll through the list and click the card size format that matches the cards you wish to print.

NOTE: Default values appear in the “Page Margin” fields depending on your selection in the “Card

Size” field. Keri Systems recommends using the default page margin values to ensure full coverage of

the cards without printing off the card edges.

8. The default values for the “Page Layout” field are set for printing one card as if it is one page in

size. This is the correct value for virtually all card printers. If you are printing to a letter sized sheet

of paper on a standard ink-jet or laser printer, you can print multiple copies of the same card by

adjusting the Cards Across and Cards Down values. The Horizontal and Vertical Spacing values

adjust how close together the cards are printed. Because of the differences in card formats and

orientation, it may take several tries to correctly determine how many cards, horizontally by

vertically, fit on a sheet of paper.

9. In the “Card Orientation” field, click on either the Portrait or Landscape radio button according to

the orientation by which the badge will be printed.

NOTE: Your choice between Portrait or Landscape orientation must match what you select under

printer setup (see Figure 9-8 on page 10 of this section).

10. Certain badge printers require that the color images be printed separately from the black images.

Refer to your badge printer manual and if this is true for your badge printer, click the “Print Color

and K planes separately” check box. A check in the box indicates this feature is enabled.

11. Once all badge printing parameters are set, click the button. The print parameters are

saved and you are ready to create your badge template by following the instructions in your

GuardDraw manual.

NOTE: If you are using cards with slot punches, please be aware of the card dimensions for the slot

punches when designing your card template.