Specifications

Doors
TM
Users Guide Keri Systems, Inc.
9-12 Section 9: Photo Badge Management 01914-009 Rev. 5.2
3.4 Card Template Design
With the doors.mdb folder pointer set, and the badging printer installed, selected, and configured, you
are now ready to create your template.
The GuardDraw manual provides detailed information on how to design a badging template (refer to the
Keri CD-ROM). The information provided in this section only provides a brief summary of the design
process.
1. If you already have a blank template open, skip to Step 4. Otherwise, double-click the
icon (on the Windows desktop) to open the GuardDraw program. The GuardDraw main window
appears (see Figure 9-2 on page 7 of this section).
2. Click the File ⇒ New pull-down menu.
3. A blank GuardDraw template is now open (see Figure 9-10).
Figure 9-10: A Blank Badge Template Window
4. Verify the correct printer has been selected. If not, “Configuring the Badging Printer” on page 8 of
this section for instructions on selecting and configuring the badging printer, and then exit and
restart the GuardDraw program.
NOTE: Prior to opening the GuardDraw program, the badging printer must be set as the system default
printer. This ensures the correct card/printer margins are applied when the GuardDraw program is
opened.
5. After you have selected your printer, click on File ⇒ Page Setup. The Page Setup window appears
(see Figure 9-11 on page 13 of this section).