Specifications

Doors
TM
Users Guide Keri Systems, Inc.
9-10 Section 9: Photo Badge Management 01914-009 Rev. 5.2
8. For applications using standard ribbons, the default Color Format value of “YMCK - Color and
Resin Black” can be left as is. This value should only be changed when using special ribbons that
require alternate settings.
9. If desired, you can also enable the optional, clear Overcoat HoloPatch™ feature. When enabled, the
button becomes active allowing you to select the position of the HoloPatch on the
card.
10. Click on the Card Tab and a window with card layout options appears (see Figure 9-8).
Figure 9-8: Printer Configuration Options – Card Tab
11. The “Image Size” field allows you to define if a template should print cards edge-to-edge or leave a
thin white boarder around the edge of the card. Click the at the right side of the “Printer model”
field. A list with these two options appears. Select the option that best suits your needs.
12. In the “Card Orientation” fields, you must select whether you want badges to be printed in Portrait
or Landscape format. Click the radio button of your choice to select the card orientation.
NOTE: Your choice between Portrait or Landscape orientation must match what you select under page
setup (see Step 9 on page 10).
13. In the “Card Layout Orientation” field you have the option of rotating the image 180°. To rotate the
template, enable the “Flip Front 180°” check box.
14. Click the Colors Tab and a window with color adjustment options appears (see Figure 9-9 on
page 11 of this section).