Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-008 Rev. 5.3 Section 8: Multiple Sites 8-23
6.0 Disabling the Multiple Sites Feature
The multiple sites feature can be disabled if necessary, removing all the site related database fields.
Before disabling the multiple sites feature, only one site can be active in the database; all other sites
must have been deleted per the instructions in “Deleting a Site” on page 21 of this section.
The Multiple Sites: Sites ON check box is used to disable the multiple sites feature (see Figure 8-28).
Building off the previous example, the Warehouse site was deleted leaving the Manufacturing-Sales site
as the only remaining site. Perform the following steps to disable the multiple sites feature.
1. Click on the Setup ⇒ System pull-down menu or click on the button on the tool bar, then
click on the System Options tab. The following window appears (see Figure 8-28).
Figure 8-28: System Options Tab - Sites Enabled
2. If the Sites field is not automatically showing, click on the button. The
System Options window will change to reveal the field for enabling multiple sites (see Figure 8-
28).
3. Click on the Sites ON box. The check mark in the box disappears. Because the changes required to
implement the sites feature make major changes to the Doors program and its supporting databases,
a confirmation window appears making this reminder (see Figure 8-29).
Figure 8-29: Save Sites Choice Window