Specifications

Doors

Users Guide Keri Systems, Inc.

8-18 Section 8: Multiple Sites 01914-008 Rev. 5.3

Figure 8-19: Multiple Site Successful Network Update

NOTE: Operator input is required when updating the network while in sites mode. If you attempt to use

the delay mode, someone will need to click on the button to begin the update process. This

is the case even if you are only updating one site.

4.4 Select a Site

A new button is added to the tool bar: . Clicking on this button displays a list of all available

sites on the access control network, allowing an operator to select a specific site with which to work.

1. Click on the button. A window appears with a list of all available sites (see Figure 8-20).

Figure 8-20: Select Site List

2. Scroll up and down the list and select the next site with which to work. Then click on the

button.

3. The Doors software connects with the selected site and loads the program spreadsheets with the

data from this site.