Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-008 Rev. 5.3 Section 8: Multiple Sites 8-17
Figure 8-17: Connect To Site Window
3. Click on the button to begin update of the site designated in the Connect To Site
window. If you do not want this site updated at this time, click on the button. If you
want to cancel the update on all sites, click on the button.
4. If you have chosen to continue with the update, once all parameters are collected, the host computer
connects to the access control network. The Network Communication window appears (see Figure
8-18).
Figure 8-18: Connecting To The Network
5. Once the first site has been updated, the Connect To Site window will appear for the next site (see
Figure 8-17). Repeat steps 3 and 4 for each site that is to be updated.
6. When the update process has been completed, the Update Network window should look similar to
Figure 8-19 on page 18 of this section.