Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-008 Rev. 5.3 Section 8: Multiple Sites 8-15
4.2 Access Group Changes
The change within the access group wizard adds a select sites window, including site information as a
part of the access group. This allows an operator to create new access groups or edit existing access
groups to allow access to just one site or to any combination of sites in the access control network.
When the select doors window in the access group wizard appears, only those doors associated with the
selected sites are displayed.
NOTE: Selected sites can be differentiated from unselected sites by the appearance of the site icon.
Selected sites stand out from the window and their site names are written in black text. Unselected sites
appear to recede into the window and their names are written in grey text.
4.2.1 For a New Access Group
The Select Sites window appears between the Edit Access Group window and the Select Doors window
(see Figure 8-15 on page 15 of this section).
1. To select the sites to be used in an access group, follow the instructions in “Setup Access Groups”
on page 44 in section 3, including the following information.
2. After clicking on the button and then the button in the Edit Access Group window
the Select Sites window appears.
3. The Select Sites window displays an icon for every site recognized by the access control network.
4. Click on the icon for any site that should be included in the new access group. For example, click
on the Mfg - Sales icon to include only the Mfg - Sales site in the access group (see Figure 8-15).
5. Click on the button and the Select Doors window appears. Complete “Create a New Access
Group” on page 45 in section 3.
Figure 8-15: Select Sites for Access Groups