Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-008 Rev. 5.3 Section 8: Multiple Sites 8-11
3.9 Site Comment
The site comment field allows an operator to enter a comment regarding the site.
1. Click on the “Comment” cell for the site (see Figure 8-10).
2. Type a brief comment about the site. For example, for the warehouse site type Parts Warehouse.
Based on the remaining parameters, the database for the Warehouse site should look similar to Figure 8-
10.
Figure 8-10: Comment Field Information - New Site
3. Once all information is entered, click on the button. If these changes are not saved before
clicking any other button or exiting the system setup window, the data entered is lost and must be
re-entered.
4. Now update the access control network with the new information. Click on the button on
the tool bar (for details on the update process refer to “Update the Network” on page 35 in
section 5).
3.10 Block Copying Site Data
The Block and Copy buttons allow an operator to select a data cell for copying to other data cells. This
can be helpful when a number of sites have the same information. To minimize data entry, enter the
information for the first site and then copy it to the remaining sites. The following fields can be block
copied.
• Site Address
•PIN
• Modem Initialization
• Global Secure Time
• Global Unlock Enable
•Comment
In this example, the modem initialization information will be copied from the Manufacturing-Sales site
to the Parts Warehouse site.
1. Click on the cell from which data should be copied. In this example, this is the Modem Init cell for
the Mfg-Sales site.