Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-008 Rev. 5.3 Section 8: Multiple Sites 8-9
3.6.2 Remote Port Number
If you are using a TCP/IP Ethernet connection, you will need to enter the Remote Port Number.
NOTE: The cell heading will continue to read as “Modem Init” until you have selected the TCP/IP
option during Setup System (see “Ethernet TCP/IP Parameters” on page 5 in section 2).
1. Click on the “Remote Port Number” cell for the site.
2. The default is set at 3001. For MSS devices, leave the Remote Port Number at the default of 3001.
For UDS devices, change the Remote Port Number to 10001. Consult your systems or network
administrator if you are unsure which device is in use.
Based on the parameters entered so far, the database for the Mfg - Sales site should look similar to
Figure 8-8 on page 9 of this section.
Figure 8-8: Site Configuration Information - Part 1
Depending upon the size of the window displayed on the screen, you might need to use the scroll bar to
bring the remaining columns into view (see Figure 8-9).
Figure 8-9: Site Configuration Information - Part 2