Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-008 Rev. 5.3 Section 8: Multiple Sites 8-3
1.0 Enable Sites
The Multiple Sites: Sites ON check box is used to enable the multiple sites feature (see Figure 8-1).
1. Click on the Setup ⇒ System pull-down menu or click on the button on the tool bar, then
click on the System Options tab.
2. If the Sites ON field is not already visible on the System Options tab, click on the
button. The System Options window will reveal the field for enabling
multiple sites (see Figure 8-1).
Figure 8-1: System Options Tab - Sites Disabled
3. Click on the Sites ON box. A check mark appears in the box. Because the changes required to
implement the sites feature make major changes to the Doors program and its supporting databases,
a confirmation window appears making this reminder (see Figure 8-2).
Figure 8-2: Sites On Confirmation Window
4. Click on the button. A Save window appears (see Figure 8-3 on page 4 of this
section). The conversion to Sites mode will not actually be made until it is saved into the program
databases.