Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-001 Rev. 5.5 Section 1: Installation of Doors 1-19
11.2 System Logon
Once the program begins, it will prompt for an operator logon (see Figure 1-11). This is an identifying
name and password for the operator entering the program. The first time the program is entered, the
default logon information must be used. Until changed, the default password provides access to
everything in the Doors program. Later in the Doors configuration process, each authorized operator is
assigned identifying names and passwords (see “Setup Operators” on page 45 in section 2).
11.2.1 To Log On the Doors Program
1. Click in the “Name” field, type the name of the operator logging on and press ENTER (the default
for this field is Keri).
2. Click in the “Password” field, type the password assigned to the operator listed in the name field
(the default for this field is Keri). Asterisks appear in the password field instead of letters so that
someone looking over your shoulder while you log on the program cannot learn your password.
Figure 1-11: Logon Window
3. Click on the button.
The program will now verify the operator name and password. If both are correct, the Logon window
disappears allowing access to the Doors program. If either are incorrect, the name and password fields
are cleared and the Logon window remains.
NOTE: The operator name and password are both case sensitive. That is, the program differentiates
between UPPER CASE and lower case in both the operator name and password. Please keep this in
mind when creating operator names and passwords, and when entering your operator name and
password to log on the Doors program.
11.2.2 To Log Off the Doors Program
Whenever one operator replaces another operator, for instance during a shift change, the original
operator should log off the system and allow the new operator to log on. This provides for correct
tracking of which operator initiated events during the shift.
1. Click on the File ⇒ Log Off pull-down menu option. The original operator is logged off the system
and the Logon window appears (see Figure 1-11).
2. Before any other operation can be performed, the new operator must log on the system as described
in “To Log On the Doors Program”.