Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-007 Rev. 5.5 Section 7: Reporting 7-15
2.5 Select Dates and Times
The dates radio buttons allow an operator to select if event information should be reported for all dates
or just between selected days and times.
1. To select all dates, click on the All Dates radio button (the default value, see Figure 7-10 on
page 11 of this section). This will show all information available on the criteria selected above
without any date filter.
2. To select dates between specific days and times, click on the From. . . To radio button. The default
is for the From. . . To fields to display today’s date.
3. In the From field, enter the beginning date and time for reporting events. If the time field is left at
the default of 00:00:00, the events from the beginning of the day (Midnight) are reported. For
example, to report on events beginning on July 4, 2000 at 17:00 hours, double-click in the From
date field and type 07/04/2000. Double-click in the From time field and type 17:00:00 (see Figure
7-17).
4. In the To field, enter the ending date and time for reporting events. If the time field is left at the
default of 23:59:59, the events from the entire day are reported. For example, to report on events
ending on July 5, 2000 at 08:00 hours, double-click in the To date field and type 07/05/2000.
Double-click in the To time field and type 08:00:00 (see Figure 7-17).
Figure 7-17: Selected Dates and Times