Specifications

Doors
TM
Users Guide Keri Systems, Inc.
7-14 Section 7: Reporting 01914-007 Rev. 5.5
2.4 Select Events
The events radio buttons allow an operator to select if event information should be reported for all
events or for just events selected from the provided list.
1. To select all events, click on the All Events radio button (the default value, see Figure 7-10 on
page 11 of this section).
2. To select events from the provided list, click on the Selected Event radio button. Beneath the
selected events radio button is a list of the seven most commonly requested event report
parameters.
3. To select any or all of these seven events for event reporting, click on the check box beside the
event. When a check mark appears in the box, the event is selected. If the box is empty, the event is
not selected (see Figure 7-16).
Figure 7-16: Selected Events