Specifications

Doors

Users Guide Keri Systems, Inc.

7-4 Section 7: Reporting 01914-007 Rev. 5.5

5. In the To field, enter the ending date and time for reporting events. If the time field is left at the

default of 23:59:59, the events from the entire day are reported. For example, to report on events

ending on September 27, 2000 at 08:00 hours, double-click in the To date field and type 09/27/

2000. Double-click in the To time field and type 08:00:00 (see Figure 7-2 on page 3 of this

section). Click on the button.

6. If there is no data that meets the date range you have entered, an empty report warning window

appears (see Figure 7-3). Click on the button and modify the date selection in the

Event File Date Range window (see Figure 7-2 on page 3 of this section).

Figure 7-3: Empty Report Warning Window

7. Once you have entered a valid date range, the Report Options window will appear (see Figure 7-4).

You are now ready to generate the report output.

Figure 7-4: Report Options Window

NOTE: Before generating a formatted report, verify the Refresh Data radio button is selected and the

Modify selection formula is not selected. Failure to do this may cause incorrect information to be

displayed in the report.