Specifications

Doors
TM
Users Guide Keri Systems, Inc.
6-40 Section 6: System Operation 01914-006 Rev. 5.2
4.3 Manual Output Control
Manual control for output points allows an operator to manually turn-on/enable or turn-off/disable an
output point. This allows an operator to control an output point and to override a link event that is
driving an output.
Following the window alarm example above, an operator can use the manual output control feature to
manually test the window alarm periodically.
1. To manually control output points, click on the Operate ⇒ Output Control pull-down menu. A
window similar to Figure 6-41 appears.
Figure 6-41: Output Control Window
2. Under the Output Point Name list, locate the output point to manually control. For this example,
locate output point 3 – the Window Alarm.
3. Under the Output Control Off/On buttons, click on the button to turn-on/enable an output
point.
4. Under the Output Control Off/On buttons, click on the button to turn-off/disable an output
point.
5. The status field at the bottom of the window displays the results of the operations performed (see
Figure 6-42).
Figure 6-42: Toggled Output Points