Specifications

Doors
TM
Users Guide Keri Systems, Inc.
6-38 Section 6: System Operation 01914-006 Rev. 5.2
Figure 6-39: Select Input and Output Points
6. Click on the Active output mode radio button to have the link drive the output relay to its active
state, sounding an alarm.
7. Click on the Enable Outputs radio button to activate the output relay (this is the default value for
outputs).
8. Click on the Latched output alarm type to have the alarm stay on until manually turned off.
9. Click on the arrow and select Activate Alarms from the list of available time zones.
10. The completed I/O Link should appear similar to Figure 6-40.
Figure 6-40: The Completed Window Alarms I/O Link