Specifications

Keri Systems, Inc. Doors

Users Guide

01914-001 Rev. 5.5 Section 1: Installation of Doors 1-13

3. Right click on the shortcut and select “Properties.” The Properties window will appear (see Figure

1-5 on page 13 of this section).

Figure 1-5: Doors Shortcut Properties Window

4. Locate the Target field. Following the path “C:\Kerisys\Doors_v4.10\doors32.exe” add the phrase

“-bdealerfile.bmp”.

5. The default display time is set for 15 seconds. To change the display time, add the phrase “-txx”

following “C:\Kerisys\Doors_v4.10\doors32.exe -bdealerfile.bmp” (xx must be a number between

01 and 30 which represents the length of time, in seconds, that the splash window will display). See

Figure 1-6.

Figure 1-6: Doors Shortcut Properties Window with Splash Path and Display Time

6. Each time the Doors program is started, the set splash window will precede the Doors splash.