Specifications

Keri Systems, Inc. Doors

Users Guide

01914-001 Rev. 5.5 Section 1: Installation of Doors 1-11

8.0 Software Installation

This section covers the following types of installations.

• a new installation of Doors software

• upgrading an existing Doors software installation to a new revision

• performing certain installation maintenance tasks

NOTE: If you are installing Doors with Badging, beginning with v3.74, the Doors software prepares

your installation/upgrade depending on what your system currently has in use. The installation wizard

will guide you through the process with system specific directions.

8.1 Installing Doors Products

An InstallShield wizard handles the software installation/upgrade process. Installing software is

basically a question and answer process. To accommodate the installation process and install Doors

software the host computer must meet the system requirements detailed in “Host Computer System

Requirements” on page 6 of this section.

The installation program tests for these host computer minimum standards before starting the

software installation process. If the host computer does not meet these minimum standards the

installation program will not run; it exits to the Windows operating system.

1. Load the installation CD into the CD-ROM of the host computer. The AutoRun Menu appears.

2. Click on the Keri product that needs to be installed or updated.

3. Follow the on-screen step-by-step instructions.

8.1.1 Adding Dealer Help Information to Doors

It is possible to add specific dealer information that will appear in the Doors About window (see Figure

1-4 on page 12 of this section.

1. Open the text editor program (eg. Notepad). Enter the information to be displayed on the About

screen in the Doors program (see Figure 1-2).

Figure 1-2: Dealer Information in Notepad

2. Click on the File ⇒ Save As pull-down menu option. The Save As window appears.

3. Locate the folder where the Doors.EXE program file is located (typically found in the

“\Kerisys\Doors_vX.XX” folder). In the File Name field, type “dealer” and make sure the Save As

Type field has “Text Documents” selected (see Figure 1-3).