Specifications

Doors
TM
Users Guide Keri Systems, Inc.
5-48 Section 5: Monitor and Update Controllers 01914-005 Rev. 5.9
4.2.1 Configure Abakt
There are four main sections in Abakt.
Source Page - select and add directories to be backed up.
Filters Page - files to be backed up are added or excluded.
Backup Type Page - select backup type
• Create New - never overwrite existing backup with the same file name
• Replace Existing - replace existing backup with the same filename
• Update Existing - add new files and update existing files already present in existing backup
with the same file name
• Freshen Existing - update files already present, don’t add new files to existing backup with the
same file name
Destination Page - select the file name and location for the backup file
The following is a few basic instructions for using Abakt to back up the Doors installation. For further
information, refer to the Abakt program’s Help.
1. To launch Abakt, click on the Operate ⇒ Launch Backup pull-down menu or click on the
tool bar button.
NOTE: To prevent potential file access errors, the Doors program must be closed before the files and
databases can be backed up.
2. A Launch Backup confirmation window appears (see Figure 5-49).
Figure 5-49: Launch Backup Confirmation
3. To keep Doors running and not launch Abakt, click on the button.
4. To close Doors and launch Abakt, click on the button.
5. Doors will close and the backup program will open (see Figure 5-50 on page 49 of this section).