Specifications

Doors
TM
Users Guide Keri Systems, Inc.
5-42 Section 5: Monitor and Update Controllers 01914-005 Rev. 5.9
3.3 Display Photo While Monitoring
The Display Photo feature is designed to allow the operator to see the photos associated with each user
as they attempt to gain access through the master controller’s A-reader. Display Photo makes it easier
for an operator monitoring activity on the master controller to see exactly who it is attempting access
without having to open the Show Photo in the Setup Users window.
NOTE: Badging must be enabled (but does not need to have a license code) and a photo must be
associated with the user in order for it to appear in the Photo View window. For further information on
how to enable badging and associate a photo with the user, see “Enable Badging in Doors” on
page 15 in section 9 and “Acquire and Edit User Photo” on page 20 in section 9.
1. From the Operate Monitor window (see Figure 5-42 on page 40 of this section), click on the
button. If communication has not been established between the host computer and the
access control network, Doors will make the connection.
2. Click on the button. The Photo View window will appear (see Figure 5-44).
Figure 5-44: Photo View Window
3. Once the Photo View window is open, an operator can size it according to how the operator wants it
positioned on the Doors window. Any combination of the Photo View and the three monitor
windows can be open at the same time. Each can be sized individually.
4. As a user attempts to gain access to the master controller, the photo associated with that user will
appear in the Photo View window (see Figure 5-45 on page 43 of this section).