Specifications

Doors
TM
Users Guide Keri Systems, Inc.
1-10 Section 1: Installation of Doors 01914-001 Rev. 5.5
7.4 Set the Host Computer Date and Time
To ensure that the date and time assigned to events on the access control system are correct, the date and
time kept by the host computer should be checked for accuracy. Part of the controller configuration
process is to set the time and date of the controllers to match that of the host computer.
NOTE: If the Doors program is running, please close the program before setting the host computer’s
date and time. Closing the program ensures that when the Doors program is started, all timing
functions are based on a correctly set host computer clock.
1. Double-click on the field on the Windows Task Bar. A clock/calendar window appears (see
Figure 1-1).
Figure 1-1: Host Computer Clock/Calendar Window
2. To set the time, double-click on the hours field of the digital clock display. Click on to advance
the clock to the correct hour. Repeat this process for the minutes, seconds, and A.M./P.M. setting.
3. In the Time zone field, click on and a list of time zones appears. Scan through the list and click
on the time zone corresponding to where the computer is located. If you live in an area that uses
Daylight Savings Time, click in the box beside the “Automatically adjust clock for daylight savings
changes” check box. A check mark in the box enables the automatic adjustment feature.
4. To set the month, click on the in the month field and a list of months appears. Scan through the
list and click on the month.
5. To set the year, click on to advance to the correct year.
6. To set the day, click on the day in the calendar.
7. Click the button and the time and date are set in the host computer.
NOTE: International date and time formats are supported by the Doors program. The program displays
and reports dates and times in the format selected when setting the host computer’s date and time.