Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-005 Rev. 5.9 Section 5: Monitor and Update Controllers 5-41
3.2 Starting Monitoring
The view window field is made up of three buttons: , , and ; one for each
monitoring window (see Figure 5-42 on page 40 of this section).
1. To open a monitor window, click on the button corresponding to the desired monitor.
NOTE: Before opening a monitor, it must have been set up in the Setup
⇒ Monitors and Events section,
defining what it monitors. Otherwise, the default is for monitor one to view all events, and for monitors
two and three to view no events. See “Setup Monitor Windows and Events” on page 3 of this section.
2. Once a monitor window is open, an operator can size it according to how the operator wants the
monitor window positioned on the Doors window.
3. Any combination of the three monitor windows can be open at the same time. Each can be sized
individually, but the default is for all three windows to be tiled horizontally across the Doors
window (see Figure 5-43).
Figure 5-43: Tiled Monitoring Windows
4. Once monitoring windows have been opened, monitoring can begin. Click on the button. If
communication has not been established between the host computer and the access control
network, Doors will make the connection.
5. As events occur on the access control network that meet the criteria of the monitoring window, they
will be displayed in the monitoring window.