Specifications

Doors
TM
Users Guide Keri Systems, Inc.
5-38 Section 5: Monitor and Update Controllers 01914-005 Rev. 5.9
2.2 Collecting Events While Updating
Collecting events from all controllers clears the controller buffers and stores the events in an event file
on the hard disk. Event data can then be processed into report formats. Updating the network and
collection of events data may be performed at the same time.
1. Click on the icon on the tool bar. The Update Network window will appear. Click on the
Skip/Update toggle box under Collect Events. The word “Skip” will be toggled to “Collect” (see
Figure 5-39).
Figure 5-39: Collect Events
2. Click on the button to begin collecting events data from the network.
3. The host computer connects to the access control network (if it isn’t already connected). The
Network Communication window appears if the access control network connection needs to be
made (see Figure 5-40).
Figure 5-40: Connecting to the Network
4. Once the connection is made, the progress of the event collection may be viewed through the Status
windows. The status windows will indicate when the event collection is complete (see Figure 5-
41 on page 39 of this section).
NOTE: Once the event collection process has begun, please be patient. The collection process can take
anywhere from several seconds to several minutes depending upon the amount of information to be
collected and the number of controllers sending information.